Burglar Alarm Installation Procedures and Tips

The complexity of an alarm system depends on the establishment it is going to be used. The more entry points, the more complicated the electrical circuit for the alarm system. Most of the time, complex alarm systems are installed in business establishments like stores. The need for a complex alarm system for this kind of establishment is higher than any building.

Most homes use simpler versions of alarm systems. In many cases, smaller homes use simple unmonitored alarm. Using alarm systems in homes is grounded in the concept that even homes and the persons residing in it needs protection too.

Alarm systems vary according to the task it is going to do. For example, when a person wanted to detect smoke or fire, he may choose installing fire alarm system in his house. Every type of alarm system works specifically to a certain job. The most common used alarm system type is the burglar alarm system.

Burglar alarm systems vary too according to the size of the building. Also, the installation complexity of such may change depending on the number of entry points to be integrated. In addition, burglar alarms may also be monitored by the police or relayed to a telephone line.

Most burglar alarm systems are installed by professionals. In many cases, the company where one bought the alarm systems is the one responsible for the installation of the alarm system.

However, there are also alarm systems that can be installed by do-it-yourselfers. These alarm systems are being sold in kits. Every kit contains complete components that one needed for the installation.

Before installing an alarm systems take note of the following considerations for a proper installation:

• The number of entry points in the house. Knowing how many entry points you have in your home will determine how many sensors you need to install. Entry points are not limited to doors. It can also be windows, fire exits, etc.

• The type of alarm system you brought. Is it a burglar alarm or a combination of a burglar alarm and a fire alarm? The more sensor types the complex the circuit will be.

• Note of the strategic place where you are going to put the control panel.

In installing the burglar alarm system, the very first component to be mounted must be the sounder or other known as the buzzer or bell. Think of where you want it to put. Most of the time, sounders are located in places that can easily be seen to warn off any burglar intending to break into the house. When the sounder is installed outside, one must make sure that it is mounted away from extreme heat or moisture. It is also advisable to enclose the sounder in a box to protect it from any atmospheric condition. Make sure also, that the sounder is placed in a way that it can be heard loudly.

After installing the sounder, the next component that must be installed is the sensors or the switches. Carefully install the sensors in edges of the windows and doors. Make sure that the magnet and the sensor is not too far from each other so that the sensor will have enough magnet reception. Do not put it otherwise too close to each other or else the magnet may sag to the sensor which can damage any of the component part.

Mount the wires neatly and integrate the rest of the components to the control panel. Test the system if it works properly by closing and opening the entry points. Make adjustments when there are components that do not work properly.

Leia Mais…

Basic Burglar Alarm Equipment

Security and disaster alarms are no longer new to most people. These devices have already been available for quite some time now and have been continuously innovated.

These deterrent instruments are usually found in business establishments. The very reason for installing such devices is for protection of properties against attempted burglary and destructive disasters like fire.

Banks and jewelry shops are examples of businesses that need high security. By using burglar alarms the security that these businesses need is met. In fact, they are being required by their insurance companies to have the most complex and effective burglar alarm that they can have. The higher the security needed the more complex the burglar alarm must be.

Burglar alarms that are installed in homes use the basic principle of alarm system. By simply using the electrical flow, alarms can be triggered to sound when conditions is met. For example, for a close circuit alarm, when the door opens, the current flow powers the sounder. Contrary to the open circuit alarm because when the current is cut, the alarm sounds.

There are only three main parts or major equipment a burglar alarm has. These are 1) the control panel, 2) signaling device and 3) detectors. These parts are being interconnected for it to work. There are systems that uses radio frequency, infrared, and the like in order to connect one part to another. The system that uses radio transmitters and receivers is called the wireless system.

Control Panel

A control panel is the central processing device of the system. It is where you program the system to work according to the specifications of the home or building. It is also where you can turn on, turn off or reset the alarm system. The control panel can be accessed using remote keypads. All specifications of a control panel may differ according to the prerogative and design of the manufacturer. The detector zones can be programmed in the control panel so whenever the detector receives unusual frequencies, the control panel processes it and let the sound device alarm. A control panel also contains a memory chip that stores the user’s settings. There are other features that a control panel may contain. It can be found in the user manual or specified in the product brochure.

Signaling Devices

These burglar alarm equipment make sounds whenever condition is met for it to alarm. A sounder may be a bell, a buzzer or a chime. Most commonly the sounder that is being used for burglar alarm systems are those that are loud enough and that can cause panic on the burglar. These days, sounders are already partnered with a strobe. A strobe is a special lighting device. It has a lamp inside that is mounted in such a way that it rotates as the sounder sounds. The most common colors used for the strobe are red, blue and yellow. Speech dialers or telephone relays are also part of the signaling equipment.

Detectors

Detectors are also called as sensors. These equipments are responsible for reporting unusual movements to the control panel. There are several types of detectors that are used for a burglar alarm system. Here are some of the commonly used detectors:

• Magnetic Contact Detectors – this type is usually used in windows and doors. These devices are mounted in the edges of the doors and windows.

• Infrared Detectors (passive infrared) – these are basically used to detect motions or unusual irregularities in the place. This can also be used to detect temperature changes and smoke.

• Vibration sensors – these devices are quite more sensitive than the magnetic contact detectors because a little vibration from the window or door can be interpreted by the device as unusual and may possibly trigger the control panel to sound the alarm.

Leia Mais…

How to Pick Out a Burglar Alarm Company

Crime can hardly be predicted. It can happen anytime, anywhere. And we can never be sure that we are out of harm’s way… not even in our own homes.

Alarm systems are one of the protective mechanisms being used against crime, particularly burglary. Today, safety alarms are manufactured in electronic forms. Samples of these include easy-to-install door sensors, portable vehicle protection devices, and sophisticated wireless home security systems.

If you want to avail of professional services with your home alarm system, you can hire a burglar alarm company. Using special computers and phone lines, as well as competent staff, alarm system companies look after the security system of homes and commercial businesses. They also coordinate with the appropriate authorities in case of security emergencies. Of course, their service comes with a monthly charge. The experience and quality of service should also be measured if hiring a burglar alarm company is being considered. That is why, it is important that you should make some research before selecting one.

Choosing the most fitting burglar alarm company should not be a tedious job if you know the proper procedures. Below are some useful guidelines you can tag on while considering hiring such companies.

Running an Initial Examination

* Call the National Burglar and Fire Alarm Association. Request for a copy of the registered member companies in your locality.

* You can also ask from them copies of brochures or magazines that provide information about home security. Read them so you can get acquainted with the basics of home protection and the terminologies employed by the industry.

* Solicit referrals from your neighbors, relatives, friends, and insurance agents.

* Call the companies suggested by your neighbors, relatives, and insurance agents, as well as those listed by the National Burglar and Fire Alarm Association. Make sure that they are duly licensed and recognized by the National Burglar and Fire Alarm Association. Moreover, inquire if they take part in the Installation Quality Certification Program.

* Reduce your selections to approximately five companies or less.

* Arrange for a meeting with the representative of the companies. Schedule the appointment in an occasion when all the members of the family can attend. This is to be sure that all of them will know what the representatives have to offer about their systems.

What to inquire to the representative

* During the appointment, ask the agent the following questions:

o For how long has the company been running? This will give you an idea of the experience of the company in the industry.

o Is the monitoring station operating 24 hours in a day? Is the customer service line accessible 24 hours a day, as well?

o Is the monitoring centers’ power supply well backed-up? You should be assured that in cases of power interruptions, your home must still be under continuous monitoring.

o Has the company undergone proper training programs? Are the staffs of the company equipped with the required skills needed for the installation or operation of employed equipment? Are they trained in troubleshooting or repairing the system, as well?

o Ask the representative to make an inspection of your area. In addition, you can also insist that he write recommendations with supportive explanations.

You can make your personal assessment of the company through your interview with its representative. If he has provided you with honest and appropriate answers, it is a sign that you can have a good deal.

Leia Mais…

How the Alarm Monitoring System Works

Burglar alarms are in electronic form. A simple set-up of an alarm system includes a sensor that is connected to one or more control units. When the sensor is triggered, the control unit seeks for a way to announce the alarm.

Basically, alarm systems can either be hardwired or wireless. The wired systems are usually used with sensors, smoke detectors for example, which demand power for reliable operation. Wired types come with the advantage of detecting tampering. However, wired systems are expensive to install. On the other hand, wireless alarm systems are easier to set-up. Instead of wires, they utilize transmitters. Wireless systems require constant supervision and maintenance to ensure efficient operation. If for example, the sensors or batteries have not been constantly checked, the system may not perform at its peak.

Alarm monitoring is employed in systems with a remote alarm output. In such systems, the control panels are connected to predetermined monitors, and they are configured in various methods. One includes a direct connection of the system to a responder, or a central station, such as a police quarters. However, this kind of configuration is becoming less popular because it is expensive. Direct monitoring connections can usually be found only in Local Government institutions, State, or school campuses where there is a dedicated security.

More conventional alarm systems make use of Public Switched Telephone Network, or PSTN. This configuration features a digital phone dialer unit which will dial the central station, which in turn will announce the alarm. The monitoring system can identify the physical location of the sensor that has been triggered with the use of certain programmed encoders. Most alarm control panels are designed with backup dialer ability that can be used when the primary PSTN route is not functioning well. The secondary dialer can be connected to a separate phone line (or an encoded radio, mobile phone, or internet interface gadgets) to entirely evade the PSTN. This is because if the primary lines have been tampered, alarms could still be raised via the redundant dialers and early warnings of pending problems can be advised.

In situations where the building is remotely located, PSTN service may not be feasible and channeling a direct line may be too expensive, there is still a way so your security can be monitored. And that is by using wireless phones or radio networks as the principal communication line. The use of the Internet as a main communication method is still very controversial within the alarm monitoring business. This is because an alarm signaling method needs to observe urgency and immediacy, and the authorities are doubtful of the quality of service of public internet.

When monitored, the alarms and speaker phones permit the central station to communicate with the owner, or even with the intruder. For monitored burglaries, the speaker phones let the central stations to convince the prowler to back off and give up as police units have been sent off.

Considering some factors, such as the location of the zone triggered and time of the day, the alarm monitoring center may perform various actions automatically. Some instructions they may initiate include calling the police stations, fire department or ambulance. They may also choose to check if the alarm is true. Some systems come with video surveillance to capture the actual acts of intrusion or other emergency cases on tape.

Leia Mais…

Free Wireless Burglar Alarm System to Drive Your Intruders Away

With numerous reports of break-ins, robberies and other crimes happening all over various neighborhoods across America, who won't be worried of the security of their homes? Even if you can replace the items that might be taken from you, you’d never know the extent of harm that these intruders can do. So to keep you away from these worries, make sure that you install a security system in your house.

The most convenient of the burglar alarms are the wireless type. It is because you don’t have to bore holes in your wall just to set up the alarms. This way, you also don’t have to disfigure your whole house just to secure your properties. Wireless burglar alarms use radio waves to send and receive signals. The system is composed of sensors, which are distributed all through the house, and a control panel which receives signals to monitor the activities of the house when it is turned on.

To fully understand the function of a wireless burglar alarm, the following are components that make this security system works:

The control panel serves as the brain of the security system. Basically, it is situated in a secured place such as a closet or the basement. It is responsible for monitoring the signals that are sent by the motion sensors. When the control panel detects an intruder or any illicit activity, it produces an alarming sound. A sophisticated version is connected to a remote security personnel office to summon for aid.

Next is the keypad. This switch is used in order to activate or deactivate the alarm system. It also contains the code that must be kept confidential for the family. For nighttime use, it is designed to be illuminated. It could be fixed to one-touch setting so that it will be easy to arm and disarm it.

Another of its components is the magnetic contacts which are placed in the zones to be protected. They could be positioned in doors and windows, the openings in the house where the intruder could possibly pass. When the keypad is armed, the magnet shall detect the opening of its zones. Therefore, the alarming sound is activated.

The wireless burglar alarms also contain contact sensors which detect any motion in their covered area. When the family is not around in the house, this alarm is activated. These sensors are usually located in places where there is no expected human presence. Once any of the sensors detect a movement, then it sets off the alarms.

Now, you may be completely convinced of the advantages of mounting burglar alarm in your place. The question is, how much will it cost you? Good news! There are free security systems in the market! And you can be sure that they are also of finest quality.

The free security system is usually awarded by large security firms which survive even just from monitoring revenues. They own the monitoring system which also serves as the source of profits. You will own the system, with highest quality, and pay for the monthly monitoring fee. Also, the home owner will post their yard sign of the security company to serve as an advertisement. The ad plays both for commercial and security purposes.

With a free wireless burglar alarm secured all over your house, you can sleep with peace of mind. And you are driving your intruders away without having to do a thing. Keep your home burglar free.

Leia Mais…

Burglar Alarm System for Commercial and Residential Safety

Security should never be a luxury. It is a need in every home as much as it is in business establishments. And security must be implemented not after an intruder had broken in but before they could even plan to.

The fact that perpetrators attack when you least expect them, your business and your castle must both be equipped to face any circumstances. These security alarms will push them to move to the next property, not yours. There are different security alarm devices that you can choose from. But here are the top choices:

• Talking devices
• Key fobs with remote control
• Yard alarm signs from security companies. With this, you don’t actually need to install one, just the sign.
• Wireless security systems
• Extra keypads
• Motion detectors

When installing the burglar alarm, here are some steps to follow:

Survey your doors and windows and see which of them would be equipped with the alarm. Basically, choose the spots which would be unnoticeable at night and most vulnerable to attackers. Then, seek the advice of your local police, security system agents or your insurance agent. Surely they could make good referrals to reliable security companies.

Let your place be inspected by each of the recommended companies and ask for a quotation. With accordance to your family or business lifestyle, decide for the appropriate type of alarm system and the zones where to position them. Some added features may please you and help you decide on the “which” question.

As part of the system, monitoring shall be made in 24 hours. And in times of intrusion, an alarm signal shall be sent to the security agency so that they can contact the local police in your area. You also have to make sure that the control panel can accommodate all the zones included in the security system. Zones are the windows or doors where the security units are placed. Frequently, there are eight zones controlled by a basic system, anyhow, it can be upgraded up to 32 zones. Afterwards, position the control panel including the keypads all throughout the house.

It would be helpful if you will choose a system that is directly connected to the smoke, lighting and water level so as to check the place for these elements. In addition, make sure that the keypads are user friendly so that they can easily be activated or deactivated. The customary problem encountered in almost all security system during winter season is freezing. The switches tend to malfunction due to snow and very low temperature. When instances like this arise, consult the proper authorities to mend the problem.

When everything is fixed, set a code that will be easily remembered by the family members. However, this code must be kept confidential for the family only. Always ensure that your system has back up power so that when power supply fails, you don’t have to worry of being intruded especially since burglars take these chances.

With the thought that your things would be safe and sound even in your absence or sleep, you surely will be saved from all sorts of stresses and worries. This is the principal advantage of securing your properties against culprits. And when you do, you will not be asking and condemning yourself of the “what ifs” and “if only”.

Leia Mais…

Don’t Drive When You’re Drunk, Neither When You Don’t Have an Automotive Burglar Alarm System

How does the importance of automotive burglar alarm system abreast with the cliché not to drive the car when drunk? Because being unsecured and being drunk can both cost life and money.

When you purchase an automotive, you certainly can’t just drive it without your other electronic gadgets such as the stereo. This means that aside from the net cost of the car, you spend some more dollars to adorn it. Well, though you may but you don’t actually fear losing your car. The equipment that you install in it are more vulnerable and appealing to burglars because they can easily be sold compared to the automobile.

And sad to say, it has already become a profession for some. You never know who among the people are burglars, and you cannot also change the fact that they live through this means. And they are just waiting for the right moment to attack. Their precious moment is when you least expect them, when you are most occupied and your car is sitting helpless.

The least thing that you can do is securing your automobile and lowering the chances of your car being a target. But unlike the yard sign that you post in your house to deceive burglars, it may not quite work with your car. And the best thing that you can do is to actually install an automotive alarm system.

Another expenditure? Yes. But will you compromise your valuables and even your own safety just for a little amount? Consider this, at times, you will be rushing to work and it will not be impossible to accidentally leave your handy gadgets in the car. It’s when the day is already over that you realize what you’ve left. If the car is not secured, your mind will neither be.

But if you have installed a security system, you will have less to worry about. There will surely be authorities to take care of your automobile’s intruders when they set off alarm of your automobile. There will be a security system that will take charge when it is impossible for you to do so.

Comparable to automobile tires, the alarm system is as well a necessity. It is not a mere luxury as some people find it. And subsequently, they change their perception regarding its importance when they have been burglarized. It is when they lost their valuable belongings and no one could point out who the perpetrator is. Other than these, there could be limitless possibilities of unfortunate events that you can encounter when unsecured.

When installing a security system, ask the company agent first on how the structure functions. This way, you can maximize the purpose of the burglar alarm. It is important that you are oriented of the details of its system. The automobile has comparatively less openings than a house, so it is less complex to mount the sensors in its windows and doors. The magnetic contacts mounted on these openings sets of the alarm when any of the doors and windows is forcedly unlocked. With the remote control in your pocket, it is easy for you to activate and deactivate the system.

For automobile owners, the automobile burglar alarm system is a primary consideration. Although the system may cost some amount, your safety is something you cannot put a price into.

Leia Mais…

What’s In It for You with Ademco Burglar Alarm?

It was during the eighteenth century that burglar alarm made its name as a mode to identify who entered a certain passageway, such as doors or windows. Nowadays, burglar alarms are not solely used as an indication for possible entrance or exit of unwanted visitors.

Burglar alarms are also utilized to notify emergency authorities such as police stations, fire stations, hospitals and the local government that a crisis is happening and that immediate help is needed.

The availability of burglar alarms in your place is a practical and functional option which can provide you utmost protection. There are various types of burglar alarms that are available on the market which you can choose from. The following factors may be grounds for you to decide on a specific burglar alarm:

Installation

For convenience purposes most people opt for do-it-yourself burglar alarm packages. By having so, they will be able to save money from the installation fee. On the other hand, there are some who desires to hire a professional to install their burglar alarm system. The main reason for choosing such option is for an assurance that the work will be properly done.

Location

These days you have the option where to install your burglar alarm – walls, doors, windows or ceilings – name it and you can have it installed in your preferred area.

Add-ons

Everyday people think of new creations to complement what has been made available. The burglar alarm for instance is but an ordinary alarm then. However, as time passes by additional features are added to enhance the standard burglar alarm.

Sensors can be made available. Sensors alert the alarm’s control panel whenever the sensor has been crossed. Moreover, there are add-on gadgets to detect movements and sounds. As the name implies, the motion detectors can identify movements and the sound detectors can distinguish odd sounds around the place. Motion detectors are often used in seldom-visited areas in a home or in an establishment.

Other factors may be considered before you purchase a burglar alarm. What you need to do is look for a respectable and highly regarded manufacturer of security equipments. It is best to undergo a company background check to ensure that you are in good hands.

The governing rules for having your preferred burglar alarm are another aspect you might want to look into. Are the burglar alarms being offered to you legally accepted by emergency units in your area? Do you need to personally register your own burglar alarm or the company where you bought it will take care of the matter? Those are some of the important queries you need to clarify.

Ademco is one good example of a company which caters good-quality security equipments. The company offers different types of electronic security systems, fire alarms and most especially burglar alarms. The equipments they have are both efficient to use at home and for business purposes.

The Internet is a good venue to conduct your research about burglar alarms. Relevant information will be made available to you by surfing the net. Features, prices and other considerations are most likely apparent in every security equipment company’s website. On the other hand, if you wish to have face-to-face interaction to gain immediate answers, you have the choice of visiting the nearest establishments that specializes in distributing security equipments. Once you did your research, then you can always decide to own a burglar alarm of your choice.

Leia Mais…